Prof. Dr. Muammer KALYON

Mühendislik Fakültesi Dekanı

Eğitim Bilgileri

Lisans:İstanbul Teknik Üniversitesi, Uçak Mühendisliği, Uçak Mühendisliği , 1981 – 1985
Yüksek Lisans:University of Michigan – Ann Arbor ABD, Uçak Mühendisliği, Uçak ve Uzay Mühendisliği , 1987 – 1989
Doktora:University of Michigan – Ann Arbor ABD, Uçak Mühendisliği, Uçak ve Uzay Mühendisliği , 1989 – 1993
Uzmanlık Alanı:Lineer ve Lineer Olmayan Dinamik Sistemlerin Modellenmesi, Analizi, Simülasyonu ve Kontrolü
Uçak, Füze ve Hava-Uzay Araçlarının Güdümü, Navigasyonu, Simülasyonu ve Kontrolü
Servomekanizmaların Yaklaşık Minimum Zamanda Kontrolü
Dinamik Sistemlerin Optimizasyonu ve Kontrolü.

Yayınlar

Uluslararası Dergilerdeki Yayınlar :
KALYON, M., ALNASSAR, Y. N., PAKDEMİRLİ, M., (2007), Stability analysis of rotating blade vibration due to torsional excitation, JOURNAL OF VIBRATION AND CONTROL, 13(9-10), 0-0
KALYON, M., YİLBAS, B. S., (2006), An approach for analytical solution pertinent to lattice temperature variation due to laser short-pulse heating, HEAT AND MASS TRANSFER, 42(12), 1-0
KALYON, M., YİLBAS, B. S., (2006), Analytical approach for entropy generation during a laser-pulse heating process, AICHE JOURNAL, 52(5), 0-0
KALYON, M., YİLBAS, B. S., (2006), Repetitive laser pulse heating analysis: Pulse parameter variation effects on closed form solution, APPLIED SURFACE SCIENCE, 252(6), 0-0
YİLBAS, B. S., KALYON, M., (2006), Analytical solution for multilayer assembly including heating and cooling cycles with laser pulse parameter variation, OPTICS AND LASERS IN ENGINEERING, 44(11), 0-0
M, K., (2005), Maintaining uniform surface temperature along pipes by insulation, ENERGY, 30(5), 0-0
A Z, S., M, K., (2004), The critical radius of insulation in thermal radiation environment, HEAT AND MASS TRANSFER, 40(5), 0-0
D A, A. O., KALYON, M., (2004), Thermoeconomic optimization of vapor-compression refrigeration systems, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 40(5), 0-0
YİLBAS, B. S., AL AQEELİ, N., KALYON, M., (2004), Laser induced thermal stresses in solids: Exponentially time decaying pulse case, LASERS IN ENGINEERING, 14(1-2), 0-0
YİLBAS, B. S., KALYON, M., (2004), Formulation of laser pulse heating: A closed form solution including heating and cooling cycles with pulse parameter variation, LASERS IN ENGINEERING, 14(3-4), 0-0
YİLBAS, B. S., KALYON, M., (2003), Laser pulse heating: a formulation of desired temperature at the surface, OPTICS AND LASERS IN ENGINEERING, 39(1), 0-0
KALYON, M., (2002), Design of continuous time controllers having almost minimum time response, JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 124(2), 0-0
KALYON, M., SAHİN, A. Z., (2002), Application of optimal control theory in pipe insulation, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 41(4), 0-0
KALYON, M., YİLBAS, B. S., (2002), Closed form solution for exponentially decaying laser pulse heating: Evaporation at the surface, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 41(6A), 0-0
YİLBAS, B. S., KALYON, M., (2002), Analytical solution for pulsed laser heating process: convective boundary condition, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 45(7), 0-0
YİLBAS, B. S., KALYON, M., (2002), Formulation of surface temperature for laser evaporative pulse heating: the time exponentially decaying pulse case, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 216(3), 0-0
YİLBAS, B. S., KALYON, M., (2002), Parametric variation of the maximum surface temperature during laser heating with convective boundary conditions, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 216(6), 0-0
YİLBAS, B. S., KALYON, M., SHUJA, M., (2002), Parametric variation analysis on time corresponding to initiation and ending of evaporation during laser heating, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 29(2), 0-0
KALYON, M., YİLBAS, B. S., (2001), Analytical solution for laser evaporative heating process: time exponentially decaying pulse case, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 34(22), 0-0
KALYON, M., YİLBAS, B. S., (2001), Analytical solution for thermal stresses during the laser pulse heating process, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 215(12), 0-0
KALYON, M., YİLBAS, B. S., (2001), Exact solution for time exponentially varying pulsed laser heating: convective boundary condition case, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 215(5), 0-0
YİLBAS, B. S., HYDER, S. J., KALYON, M., (2001), Laser shortpulse heating: Determination of lagging time due to different pulse parameters, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 28(6), 0-0
YİLBAS, B. S., KALYON, M., (2001), Repetitive laser pulse heating with a convective boundary condition at the surface, JOURNAL OF PHYSICS D-APPLIED PHYSICS, 34(2), 0-0
KALYON, M., (1997), Continuous proximate time-optimal control of an aerodynamically unstable rocket, JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, 20(5), 0-0
Uluslararası Konferans ve Sempozyumlar :
BADJİE, A. K., KALYON, M., (2019), Nonlinear Control of Power Coefficients in Wind Turbines, Teknoloji ve Uygulamalı Bilimler Dergisi (Journal of Technologies and Applied Sciences), , Şubat
AL NASSAR, Y., KALYON, M., PAKDEMİRLİ, A., (2007), Stability analysis of rotating blade vibration due to torsional excitation, Conference Information: International Symposium on Mathematical Methods in Engineering , , Eylül
KALYON, M., (2004), Near Minimum Time Optimal Track-to-track Seek Control of HDD by Continuous Proximate Time-Optimal Control, “, Mechatronics Forum International Conference 2004, pp. 45-57, Aug. 30-Sept.1, , Eylül
KALYON, M., YİLBAS, B. S., (2000), Laser Pulse Heating: A Formulation of Desired Temperature at the Surface , Recent Advances in Transport Phenomena (the proceedings of the Twelfth International Symposium on Transport Phenomena), , Mart
GOKASAN, M., KURTULAN, S., KALYON, M., BOGASYAN, S., CALİSKAN, F., YİLDİZ, O., (1999), Analysis of the Control System for the Bosphorus Light Metro Vehicle, 2nd Advanced Technologies Symposium, Istanbul, , Mart
KALYON, M., KURTULAN, S., GOKASAN, M., YİLDİZ, O., BOGASYAN, S., CALİSKAN, F., (1999), Simulation of the Control System for the Bosphorus Light Metro Vehicle, 2nd Advanced Technologies Symposium, Istanbul, , Mart
JAFAROV, E. M., KALYON, M., (1997), Design of relay and variable structure observers for multi-input multi-output systems with time-lag, Conference: 1997 IEEE International Symposium on Intelligent Control Location: ISTANBUL, , Temmuz
KALYON, M., (1997), Speed Control of a DC Motor with Continuous Proximate Time-Optimal Controller, The Second Scientific-Technical Seminar on Gas Turbine Engines, Istanbul, , Ekim
SAKA, M. H., KALYON, M., DENİZ, M., BAHAR, M., (1997), Monitoring a moving vehicle in real-time with GPS, International Symposium on GIS/GPS, , Eylül
BORAT, O., KODAL, A., KALYON, M., (1995), Behaviour of Platinum Thermo-Element Exposed to a Propagating Combustion Wave, 1st International Aerospace and Advanced Technologies Symposium, Istanbul, , Mart
KALYON, M., (1994), Simulation of a Homing Missile, 1st International Aerospace and Advanced Technologies Symposium, Istanbul, , Mart
Ulusal Konferans ve Sempozyumlar :
KALYON, M., (1995), Fonksiyon Teşekkülü Metodunun Servomekanizmaların Kontroluna Uygulanması, . Ulusal Makina Teorisi Sempozyumu, İstanbul, , Eylül
KALYON, M., YILDIZ, Ö., (1994), Bir Roketin Eğimli Bir Düzlem Boyunca Olan Maksimum Menzilinin Hasabı, 1nci Havacılık Sempozyumu, , Haziran
Yayınlara Yapılan Atıflar :
H, A., YLBAS, B. S., AL DWEİK, A. Y., (2016), CANADIAN JOURNAL OF PHYSICS, Non-equilibrium energy transport and entropy production due to laser short-pulse irradiation, 130-138(94), 0-0
HONG, C., (2016), MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , Rapid heating-induced vibration of composite magnetostrictive shells, 415-422 (23), 0-0
KHAN, N. B., BARİFCANİ, A., (2016), JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING , A case study: Application of energy and exergy analysis for enhancing the process efficiency of a three stage propane pre-cooling cycle of the cascade LNG process, 125-133 (29), 0-0
NAN, G., (2016), JOURNAL OF AEROSPACE ENGINEERING, Modeling and Dynamic Analysis of Shrouded Turbine Blades in Aero-Engines, 04015021(29), 0-0
SİM, M. S., LEE, C. M., (2016), INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Determination of optimal laser power according to the tool path inclination angle of a titanium alloy workpiece in laser-assisted machining, 1717-1724(83), 0-0
WANG, Z., QUAN, X., YAO, W., (2016), INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Plasma resonance effects on bubble nucleation in flow boiling of a nanofluid irradiated by a pulsed laser beam, 90-94 (72), 0-0
YILDIZ, A., ERSOZ, M. A., (2016), RENEWABLE & SUSTAINABLE ENERGY REVIEWS, The effect of wind speed on the economical optimum insulation thickness for HVAC duct applications, 1289-1300(55), 0-0
EL SAYED, A. T., BAUOMY, H. S., (2015), JOURNAL OF VIBRATION AND CONTROL, Passive and active controllers for suppressing the torsional vibration of multiple-degree-of-freedom system, 2616-2632 (21), 0-0
KOROLEV, A. V., KOROLEV, A. A., (2015), SARATOV FALL MEETING 2014: OPTICAL TECHNOLOGIES IN BIOPHYSICS AND MEDICINE XVI; LASER PHYSICS AND PHOTONICS XVI; AND COMPUTATIONAL BIOPHYSICS, Temperature Distribution Within and Outside the Laser Heating Zone, 94481X (9448), 0-0
KOROLEV, A. V., KOROLEV, A. A., (2015), SARATOV FALL MEETING 2014: OPTICAL TECHNOLOGIES IN BIOPHYSICS AND MEDICINE XVI; LASER PHYSICS AND PHOTONICS XVI; AND COMPUTATIONAL BIOPHYSICS, Temperature Distribution Within and Outside the Laser Heating Zone, 94481X(9448), 0-0
LEVESQUE, L., NOEL, J. M., (2015), BIOMEDICAL OPTICS EXPRESS, Controlling the temperature of bones using pulsed CO2 lasers: observations and mathematical modeling, 4768-4780(6), 0-0
NEMATCHOUA, M. K., RAMİNOSOA, C. R., (2015), Study of the economical and optimum thermal insulation thickness for buildings in a wet and hot tropical climate: Case of Cameroon, RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 1192-1202(50), 0-0
YİLBAS, B. S., (2015), LASERS IN ENGINEERING, Closed Form Solution for Temperature Rise in a Two Layer Assembly During Laser Step Input Pulse Heating with the Presence of Convection Cooling at Surface, 241-261(32), 0-0
YİLDİZ, A., ERSOZ, M. A., (2015), Determination of the economical optimum insulation thickness for VRF (variable refrigerant flow) systems, ENERGY, 835-844(89), 0-0
YLBAS, B. S., H, A., (2015), LASERS IN ENGINEERING, Closed Form Solution for Temperature Rise in a Two Layer Assembly During Laser Step Input Pulse Heating with the Presence of Convection Cooling at Surface, 241-261(32), 0-0
ZHANG, L., SHANG, X., (2015), Analytical solution to non-Fourier heat conduction as a laser beam irradiating on local surface of a semi-infinite medium, NTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 772-780(85), 0-0
FENG, H., CHEN, L., XİE, Z., (2014), CHINESE SCIENCE BULLETIN, Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions, 59(20), 0-0
FENG, H., CHEN, L., XİE, Z., (2014), HINESE SCIENCE BULLETIN, Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions, 59(20), 0-0
FENG, H., CHEN, L., XİE, Z., (2014), INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall, 63(1), 0-0
HUİJUN, F., LİNGEN, C., ZHİHUİ, X., (2014), Constructal entransy dissipation rate minimization for variable cross-section insulation layer of the steel rolling reheating furnace wall, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 52(/1), 0-0
HUİJUN, F., LİNGEN, C., ZHİHUİ, X., (2014), Constructal entransy optimizations for insulation layer of steel rolling reheating furnace wall with convective and radiative boundary conditions, CHINESE SCIENCE BULLETIN, 59(20), 0-0
KAYFECİ, M., YABANOVA, İ., KECEBAS, A., (2014), APPLIED THERMAL ENGINEERING , The use of artificial neural network to evaluate insulation thickness and life cycle costs: Pipe insulation application, 69(278-284), 0-0
KAYNAKLİ, O., (2014), Economic thermal insulation thickness for pipes and ducts: A review study, RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 30(/1), 0-0
KAYNAKLİ, O., (2014), RENEWABLE & SUSTAINABLE ENERGY REVIEWS, Economic thermal insulation thickness for pipes and ducts: A review study, 30(184-194), 0-0
MAZZEİ, M. S., MUSSATİ, M. C., MUSSATİ, S. F., (2014), INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , NLP model-based optimal design of LiBr-H2O absorption refrigeration systems, 38(58-70), 0-0
TİNG, K., CHEN, K. T., (2014), MECHANICAL ENGINEERING, Effects of thermal energy accumulations of multi-point heat sources in laser cosmetic surgery, 228(2), 0-0
YİLBAS, B. S., ALİ, H., AL DWEİK, A. Y., (2014), CANADIAN JOURNAL OF PHYSICS, Thermal stress analysis and entropy generation rate due to laser short pulse heating of a metallic surface, 92(12), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2013), LASERS IN ENGINEERING, Entropy Generation Rate During Laser Short Pulse Heating: Contribution of Heat Transfer and Thermal Stress, 25(5-6), 0-0
DEOK HONG, K., SYLVİE, L., BEJAN, A., (2013), Constructal distribution of multi-layer insulation, INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 37(2), 0-0
HUANG, S., JANİ, J. M., LEARY, M., (2013), APPLIED THERMAL ENGINEERING, The critical and crossover radii on transient heating, 60(1-2), 0-0
KANG, D. H., LORENTE, S., BEJAN, A., (2013), INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Constructal distribution of multi-layer insulation, 37(2), 0-0
KECEBAS, A., (2013), RENEWABLE & SUSTAINABLE ENERGY REVIEWS, Variation of insulation thickness and exergetic cost saving with outdoor temperature in pipe insulation, 32(3), 0-0
LİNGEN, C., KANG, M., YANLİN, G., (2013), Optimal Configuration of a Bimolecular, Light-Driven Engine for Maximum Ecological Performance, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 38(2), 0-0
NAN, G., (2013), An analytical method for vibro-impact between shrouded blades under a multiple-harmonic excitation, JOURNAL OF VIBROENGINEERING, 15(4), 0-0
SİNHA, S. K., (2013), Rotordynamic analysis of asymmetric turbofan rotor due to fan blade-loss event with contact-impact rub loads, JOURNAL OF SOUND AND VIBRATION, 332(9), 0-0
WANG, P., ZHOU, Z., Lİ, Y., (2013), ADVANCED RESEARCH ON MATERIAL, ENERGY AND CONTROL ENGINEERING, Comparison between Numerical Simulation and Analytical Calculation of Heat Loss and Temperature Profile of Buried Pipes, 648(237-240), 0-0
AL QAHTANİ, H. M., (2012), LASERS IN ENGINEERING, A Closed Form Solution of Temperature and Stress Fields for Laser Short-Pulse Heating of a Solid: Exponentially Decaying Volumetric Source, 22(1-2), 0-0
FENG, H., CHEN, L., XİE, Z., (2012), SCIENCE CHINA-TECHNOLOGICAL SCIENCES, Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle, 55(12), 0-0
FENG, H., CHEN, L., XİE, Z., (2012), Thermal insulation constructal optimization for steel rolling reheating furnace wall based on entransy dissipation extremum principle, SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 55(12), 0-0
GUPTA, A., NATH, A. K., (2012), Temperature Field of Repetitive Laser Pulse Irradiation and Its Effect on Laser Surface Hardening, MECHANICAL AND AEROSPACE ENGINEERING, 110-116(1-7), 0-0
JEON, Y., LEE, C. M., (2012), INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, Current Research Trend on Laser Assisted Machining, 13(2), 0-0
LU, C., HU, F., HUANG, X., (2012), MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4 Book Series: Advanced Materials Research, Analysis of thermal elasto-plastic stress during pulsed laser heating a K418 alloy plate, 538-541(1892-1896), 0-0
NATH, A. K., GUPTA, A., BENNY, F., (2012), Theoretical and experimental study on laser surface hardening by repetitive laser pulses, SURFACE & COATINGS TECHNOLOGY, 55(1-3), 0-0
PENG, H. S., CGEN, C. L., Lİ, G. S., (2012), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Application of residual correction method to laser heating process, 55(1-3), 0-0
PENG, H. S., CHEN, C. L., Lİ, G. S., (2012), Application of residual correction method to laser heating process, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 55(1-3), 0-0
PENG, H. S., Lİ, C. L., Lİ, G. S., (2012), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , Application of residual correction method to laser heating process, 55(1-3), 0-0
SAHİN, A. Z., (2012), INTERNATIONAL JOURNAL OF EXERGY, Critical insulation thickness for maximum entropy generation, 10(1), 0-0
SHİDFAR, A., JAZBİ, B., ALİNEJADMOFRAD, M., (2012), OPTICS AND LASER TECHNOLOGY , Inverse estimation of the pulse parameters of a time-varying laser pulse to obtain desired temperature at the material surface, 44(6), 0-0
SHİDFAR, A., JAZBİ, B., ALİNEJADMOFRAD, M., (2012), OPTICS AND LASER TECHNOLOGY, Inverse estimation of the pulse parameters of a time-varying laser pulse to obtain desired temperature at the material surface, 44(6), 0-0
YİLBAS, B. S., AKHTAR, S. S., KARATAS, C., (2012), MACHINING SCIENCE AND TECHNOLOGY, LASER STRAIGHT CUTTING BRONZE SHEETS: THERMAL STRESS ANALYSIS AND EXPERIMENT, 16(1), 0-0
YİLBAS, B. S., AL DWEİK, A. Y., (2012), Closed form solutions for thermal stress field due to non-equilibrium heating during laser short-pulse irradiation, PHYSICA B-CONDENSED MATTER, 407(12), 0-0
YİLBAS, B. S., AL DWEİK, A. Y., (2012), PHYSICA B-CONDENSED MATTER , Closed form solutions for thermal stress field due to non-equilibrium heating during laser short-pulse irradiation, 407(12), 0-0
ZARE, V., MAHMOUDİ, S. M., YARİ, M., (2012), ENERGY, Thermoeconomic analysis and optimization of an ammonia-water power/cooling cogeneration cycle, 47(1), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2011), CANADIAN JOURNAL OF PHYSICS , Closed-form solution of Cattaneo equation including volumetric source in relation to laser short-pulse heating, 89(7), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2011), CANADIAN JOURNAL OF PHYSICS, Closed-form solution of Cattaneo equation including volumetric source in relation to laser short-pulse heating, 89(7), 0-0
BASOGUL, Y., KECEBAS, A., (2011), ENERGY, Economic and environmental impacts of insulation in district heating pipelines, 36(10), 0-0
BOUAZİZ, M. N., BOUTALBİ, N., (2011), INTERNATIONAL JOURNAL OF THERMOPHYSICS, Laser Heating of a Material with Time-Dependent Laser Source, 32(5), 0-0
COLLİNS, J., GREMAUD, P., (2011), MATHEMATICS AND COMPUTERS IN SIMULATION, A simple model for laser drilling, 81(8), 0-0
FARZANEH GORD, M., RASEKH, A., MORTEZA, S., (2011), LOWERING UNCERTAINTY IN CRUDE-OIL MEASUREMENT BY SELECTING OPTIMIZED ENVELOPE COLOR OF A PIPE-LINE, THERMAL SCIENCE, 15(1), 0-0
GUPTA, A., ASHİSH, K., (2011), MECHANICAL AND AEROSPACE ENGINEERING, Temperature Field of Repetitive Laser Pulse Irradiation and Its Effect on Laser Surface Hardening, 110-116(823-830), 0-0
LE, T., JEON, J. U., (2011), ENGINEERING SCIENCE, Stability analysis of a time-optimally controlled electrostatic suspension system and suspension experiments in a vacuum, 225(C1), 0-0
LO, C. Y., WU, L. W., (2011), DEVELOPMENT OF HORIZONTAL PIPE FLOW TEMPERATURE IN THE PRESENCE OF SOLAR RADIATION AND THERMAL LEAKAGE TO THE AMBIENT, HEAT TRANSFER RESEARCH, 32(2), 0-0
PENG, H. S., CHEN, C. L., (2011), APPLICATION OF HYBRID DIFFERENTIAL TRANSFORMATION AND FINITE DIFFERENCE METHOD ON THE LASER HEATING PROBLEM, NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 209(7), 0-0
PENG, H. S., CHEN, C. L., (2011), NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , APPLICATION OF HYBRID DIFFERENTIAL TRANSFORMATION AND FINITE DIFFERENCE METHOD ON THE LASER HEATING PROBLEM, 59(1), 0-0
PENG, H. S., CHEN, C. L., (2011), NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, APPLICATION OF HYBRID DIFFERENTIAL TRANSFORMATION AND FINITE DIFFERENCE METHOD ON THE LASER HEATING PROBLEM, 59(1), 0-0
YACOB, N. A., ISHAK, A., (2011), CANADIAN JOURNAL OF CHEMICAL ENGINEERING, Stagnation point flow towards a stretching/shrinking sheet in a micropolar fluid with a convective surface boundary condition, 90(3), 0-0
YİLBAS, B. S., ARİF, A. F., (2011), OPTICS AND LASER TECHNOLOGY, Laser cutting of steel and thermal stress development, 43(4), 0-0
AL QAHTANİ, H. M., YİLBAS, B. S., (2010), LASERS IN ENGINEERING, Analytical Solution for Temperature Distribution in a Coated Solid Substrate: An Effective Boundary Condition Approach, 19(3-4), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2010), PHYSICA B-CONDENSED MATTER, The closed form solutions for Cattaneo and stress equations due to step input pulse heating, 19(3-4), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2010), PHYSICA B-CONDENSED MATTER, The closed form solutions for Cattaneo and stress equations due to step input pulse heating, 405(18), 0-0
AL THEEB, H. M., YİLBAS, B. S., (2010), CANADIAN JOURNAL OF PHYSICS, Analytical solution for electron and lattice site temperatures due to laser-induced non-equilibrium energy transport in metals, 88(7), 0-0
AZİZ, A., MAKİNDE, O. D., (2010), Heat transfer and entropy generation in a two-dimensional orthotropic convection pin fin, INTERNATIONAL JOURNAL OF EXERGY, 7(7), 0-0
BAHADORİ, A., VUTHALURU, H. B., (2010), APPLIED ENERGY, A simple method for the estimation of thermal insulation thickness, 87(2), 0-0
FARZANEH GORD, M., RASEKH, A., NABATİ, A., (2010), Investigation about the effects of exterior surface paint color on temperature development in aboveground pipeline, SOLAR ENERGY, 84(12), 0-0
GOLDSTEİN, R. J., IBELE, W. E., PATANKAR, S. V., (2010), Heat transfer-A review of 2005 literature, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(21-22), 0-0
KECEBAS, A., ALKAN, M. A., MUSTAFA, M., (2010), Heat transfer-A review of 2004 literature, NTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 53(21-22), 0-0
NEJATOLAHİ, M., SAYYAADİ, H., (2010), PROCEEDINGS OF THE ASME 10TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, VARIOUS CRITERIA IN OPTIMIZATION OF A VAPOR COMPRESSION REFRIGERATION SYSTEM, 4(1712-1722), 0-0
PALANİ, I. A., VASA, N. J., SİNGAPERUMAL, M., (2010), THIN SOLID FILMS, Influence of laser wavelength and beam profile on Nd3+:YAG laser assisted formation of polycrystalline-Si films, 518(15), 0-0
SHİH, T. M., THAMİRE, C., SUNG, C. H., (2010), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Method of synthetic constraint, Fermat’s principle and the constructal law in the fundamental principle of conductive heat transport, 57(3-4), 0-0
SHİH, T. M., THAMİRE, C., SUNG, C. H., (2010), NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, LITERATURE SURVEY OF NUMERICAL HEAT TRANSFER (2000-2009): PART I, 57(3-4), 0-0
XUAN, F. Z., CAO, L. Q., WANG, Z., (2010), Mass transport in laser surface nitriding involving the effect of high temperature gradient: Simulation and experiment, COMPUTATIONAL MATERIALS SCIENCE, 49(1), 0-0
YİLBAS, B. S., ARİF, A. F., ALEEM, B. J., (2010), JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Laser Cutting of Rectangular Blanks in Thick Sheet Steel: Effect of Cutting Speed on Thermal Stresses, 19(2), 0-0
YİLBAS, B. S., ARİF, A., ALEEM, B. J., (2010), OPTICS AND LASERS IN ENGINEERING, Laser cutting of sharp edge: Thermal stress analysis, 48(1), 0-0
AL KHAİRY, R. T., AL OFEY, Z. M., (2009), JOURNAL OF APPLIED MATHEMATICS , Analytical Solution of the Hyperbolic Heat Conduction Equation for Moving Semi-Infinite Medium under the Effect of Time-Dependent Laser Heat Source, 604695 (604695 ), 0-0
AL KHAİRY, R. T., AL OFEY, Z. M., (2009), JOURNAL OF APPLIED MATHEMATICS, Analytical Solution of the Hyperbolic Heat Conduction Equation for Moving Semi-Infinite Medium under the Effect of Time-Dependent Laser Heat Source, 604695(604695), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2009), OPTICS AND LASER TECHNOLOGY, Comparison of temperature field due to laser step input and time exponentially varying pulses, 41(8), 0-0
GEBRESLASSİE, B. H., GUİLLEN GOSALBEZ, G., JİMENEZ, L., (2009), Design of environmentally conscious absorption cooling systems via multi-objective optimization and life cycle assessment, APPLIED ENERGY, 86(9), 0-0
HAMDAN, M., AL NİMR, M. D., (2009), JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER , Critical Coating Radius of Spherical Particle in Thermal Radiation Environment, 23(3), 0-0
KUMAR, B. S., ALFRED, N., (2009), JOURNAL OF GUIDANCE CONTROL AND DYNAMICS, Time-Optimal Low-Thrust Formation Maneuvering Using a Hybrid Linear/Nonlinear Controller, 32(1), 0-0
MEDEİROS NEİRA, D. S., MARİNHO, G. S., (2009), JOURNAL OF NATURAL FIBERS, Nonwoven Sisal Fiber as Thermal Insulator Material, 6(2), 0-0
TAHA AL, Z. Y., HASHMİ, M. S., YİLBAS, B. S., (2009), JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Effect of WC on the residual stress in the laser treated HVOF coating, 2(7), 0-0
WECHSATOL, W., LORENTE, S., BEJAN, A., (2009), Elemental T and Y Shapes of Tree Networks of Ducts with Various Cross-Sectional Shapes, JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 135(2), 0-0
YİLBAS, B. S., MANSOOR, S. B., (2009), INTERNATIONAL JOURNAL OF THERMAL SCIENCES , Laser pulse heating and phase changes in the irradiated region: Temperature-dependent thermal properties case, 48(4), 0-0
YİLBAS, B., AL AQEELİ, N., (2009), OPTICS AND LASER TECHNOLOGY, Analytical investigation into laser pulse heating and thermal stresses, 41(2), 0-0
YİLBAS, B., ARİF, A., ALEEM, B. J., (2009), PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Laser cutting of large-aspect-ratio rectangular blanks in thick sheet metal: thermal stress analysis, 223(1), 0-0
Z Y, T. A., HASHMİ, M. S., YİLBAS, B. S., (2009), Effect of WC on the residual stress in the laser treated HVOF coating, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 209(7), 0-0
ANTONOV, V., IORDANOVA, L., (2008), 15TH INTERNATIONAL SCHOOL ON QUANTUM ELECTRONICS: LASER PHYSICS AND APPLICATIONS , Development and application of analytical and numerical models for characterization of thermal fields during surface laser treatment, 7027(702705 ), 0-0
DİNG, W., SHEN, Z., LU, J., (2008), NONLINEAR OPTICS: TECHNOLOGIES AND APPLICATIONS Book Series: PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE) , Analysis of the influence of the radius of incident laser beam on the radius of melting area of semiconductor irradiated by long-pulse high-power laser – art. no. 683919, 6839(83919-83919), 0-0
HABEDANK, G., WOİTSCHİG, J., SEEFELD, T., (2008), MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , Endurance limit of pulsed laser hardened component-like specimens – Experiment and simulation, 488(1-2), 0-0
KALYON, M., YİLBAS, B. S., (2008), HEAT AND MASS TRANSFER, An approach for analytical solution pertinent to lattice temperature variation due to laser short-pulse heating, 42(12), 0-0
LE THE, T., JEON, J. U., (2008), 2008 10TH INTERNATIONAL CONFERENCE ON CONTROL AUTOMATION ROBOTICS & VISION, Electrostatic Suspension System Using Bang-Bang Time Optimal Control and Stability Analysis, 1-4(827-832), 0-0
SHUJA, S. Z., YİLBAS, B. S., KHAN, S., (2008), OPTICS AND LASER TECHNOLOGY , Laser heating of semi-infinite solid with consecutive pulses: Influence of materaial properties on temperature field, 183(2-3), 0-0
SHUJA, S. Z., YİLBAS, B. S., SHAFİQUE M A, K., (2008), Laser heating of semi-infinite solid with consecutive pulses: Influence of materaial properties on temperature field, OPTICS AND LASER TECHNOLOGY , 40(3), 0-0
YİLBAS, B. S., BİN MANSOOR, S., SHUJA, S. Z., (2008), AICHE JOURNAL, Laser pulse heating and vapor front generation, 54(3), 0-0
YİLBAS, B. S., BİNMANSOOR, S., (2008), HEAT AND MASS TRANSFER, Entropy generation in laser heating in relation to machining, 44(3), 0-0
YİLBAS, B. S., MANSOOR, S. B., (2008), JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Laser-Pulsed Heating of Aluminum: Cavity Formation at the Surface, 17(6), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2007), Laser evaporative heating: Exact solution or temperature rise due to step input pulse, LASERS IN ENGINEERING, 17(5-6), 0-0
AL QAHTANİ, H., YİLBAS, B. S., (2007), LASERS IN ENGINEERING, Laser evaporative heating: Exact solution or temperature rise due to step input pulse, 17(5-6), 0-0
KARATAS, C., YİLBAS, B. S., ALEEM, A., (2007), Laser treatment of cemented carbide cutting tool, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 183(2-3), 0-0
KHENNER, M., (2007), PHYSICAL REVIEW E, Tailoring of crystal surface morphology by induced spatiotemporal oscillations of temperature, 75(2), 0-0
KİZİLKAN, O., SENCAN, A., KALOGİROU, S. A., (2007), CHEMICAL ENGINEERING AND PROCESSING, Thermoeconomic optimization of a LiBr absorption refrigeration system, 46(12), 0-0
LİVADİOTİS, G., (2007), OURNAL OF PHYSICS D-APPLIED PHYSICS, Thermal ghosts’: apparent decay of fixed surfaces caused by heat diffusion, 43(9), 0-0
MAJUMDAR, P., XİA, H., (2007), APPLIED MATHEMATICAL MODELLING , A Green’s function model for the analysis of laser heating of materials, 31(6), 0-0
MAJUMDAR, P., XİA, H., (2007), APPLIED MATHEMATICAL MODELLING, A Green’s function model for the analysis of laser heating of materials, 31(6), 0-0
MARTAN, J., KUNES, J., SEMMAR, N., (2007), APPLIED SURFACE SCIENCE, Experimental mathematical model of nanosecond laser interaction with material, 253(7), 0-0
ROZNİAKOWSKA, M., YEVTUSHENKO, A. A., (2007), HEAT AND MASS TRANSFER, The effect of the time structure of laser pulse on the temperature distribution in homogeneous body with coating, 43(5), 0-0
SHUJA, S. Z., YİLBAS, B. S., SHAZLİ, S. Z., (2007), HEAT AND MASS TRANSFER, Laser repetitive pulse heating influence of pulse duty on temperature rise, 43(9), 0-0
FARİAUT, F., BOULMER LEBORGNE, C., SEMMAR, N., (2006), APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, High-speed mass-transport phenomena during carburization of aluminum alloy by laser plasma treatment, 83(1), 0-0
FRUMAR, M., FRUMAROVA, B., NEMEC, P., (2006), JOURNAL OF NON-CRYSTALLINE SOLIDS, Thin chalcogenide films prepared by pulsed laser deposition – new amorphous materials applicable in optoelectronics and chemical sensors, 352(6-7), 0-0
GOLDSTEİN, R., IBELE, W., PATANKAR, S., (2006), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , Heat transfer – A review of 2003 literature, 49(3-4), 0-0
HALLO, L., RİOU, O., STENZ, C., (2006), JOURNAL OF PHYSICS D-APPLIED PHYSICS, Infrared emissivity studies of melting thresholds and structural changes of aluminium and copper samples heated by femtosecond laser pulses, 39(24), 0-0
KALYON, M., YİLBAS, B. S., (2006), APPLIED SURFACE SCIENCE, Repetitive laser pulse heating analysis: Pulse parameter variation effects on closed form solution, 252(6), 0-0
KHENNER, M., (2006), SURFACE ENGINEERING FOR MANUFACTURING APPLICATIONS, Oscillatory temperature-driven morphological relaxation of surface ripple using weak pulsed laser, 890(249-254), 0-0
YİLBAS, B. S., KALYON, M., (2006), AICHE JOURNAL, Analytical approach for entropy generation during a laser-pulse heating process, 52(5), 0-0
YİLBAS, B. S., KALYON, M., (2006), OPTICS AND LASERS IN ENGINEERING, Analytical solution for multilayer assembly including heating and cooling cycles with laser pulse parameter variation, 44(11), 0-0
YİLBAS, B., AGEELİ, N., (2006), JOURNAL OF THERMAL STRESSES, Thermal stress development due to laser step input pulse heating, 29(8), 0-0
GOLDSTEİN, R., ECKERT, E., IBELE, W., (2005), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , Heat transfer – a review of 2002 literature, 48(5), 0-0
GOLDSTEİN, R., ECKERT, E., IBELE, W., (2005), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Heat transfer – a review of 2002 literature, 48(5), 0-0
WEBB, J., (2005), JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, Theory of pulsed photothermal radiometry for transmission and lateral geometries, 44(8), 0-0
YİLBAS, B. S., (2005), HEAT TRANSFER ENGINEERING, Entropy analysis due to temperature and stress fields in the solid irradiated by a time exponentially varying laser pulse, 26(8), 0-0
YİLBAS, B. S., ARİF, A., (2005), PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Laser short-pulse heating with time-varying intensity and thermal stress development in the lattice subsystem, 219(1), 0-0
YİLBAS, B., (2005), HEAT TRANSFER ENGINEERING, Entropy analysis due to temperature and stress fields in the solid irradiated by a time exponentially varying laser pulse, 28(8), 0-0
HE, Y., DU, D., SUN, Z., (2004), SCIENCE IN CHINA SERIES E-ENGINEERING & MATERIALS SCIENCE , Analytical solution and experimental verification for pulsed laser heating process with convective boundary condition, 47(3), 0-0
YİLBAS, B. S., (2004), JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, Entropy production due to time exponentially varying laser pulse: Convective boundary condition case, 43(5A), 0-0
YİLBAS, B. S., AL AQEELİ, N., (2004), INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Thermal stresses due to time exponentially decaying laser pulse: elasto-plastic wave propagations, 46(1), 0-0
YİLBAS, B. S., AL AQEELİ, N., (2004), NTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , Thermal stresses due to time exponentially decaying laser pulse: elasto-plastic wave propagations, 46(1), 0-0
YİLBAS, B., (2004), HEAT AND MASS TRANSFER, Entropy generation due to laser step input pulse heating, 40(12), 0-0
YİLBAS, B., (2004), JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, Entropy production due to time exponentially varying laser pulse: Convective boundary condition case, 43(5A), 0-0
YİLBAS, B. S., SHUJA, S., (2003), PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Laser non-conduction limited heating and prediction of surface recession velocity in relation to drilling, 217(9), 0-0
YİLBAS, B., AL AQEELİ, N., (2003), PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Formulation of laser-induced thermal stresses: stress boundary at the surface, 217(4), 0-0
CAİ, G., HUANG, J., (2002), EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, Discrete-time variable structure control method for seismic-excited building structures with time delay in control, 31(7), 0-0
KALYON, M., (2002), JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME , Design of continuous time controllers having almost minimum time response, 124(2), 0-0
JAFAROV, E., (1999), LARGE SCALE SYSTEMS: THEORY AND APPLICATIONS 1998 (LSS’98), State feedback sliding mode control for SISO systems with time-delay, 1(203-208), 0-0

Yönetilen Tezler

Yüksek Lisans
Badjıe, A. (2019). Non-Linear Control Of Power Coefficients in Wind Turbines, İstanbul Ticaret Üniversitesi, Fen Bilimleri Enstitüsü, Mekatronik Mühendisliği İngilizce Tezli Yüksek Lisans Programı, 2019

Jürilikler

ÜAK (Doçentlik sınavı), Eser İnceleme, İstanbul Ticaret Üniversitesi, 12.02.2015
ÜAK (Doçentlik sınavı), eser inceleme, İstanbul Ticaret Üniversitesi, 12.02.2015
ÜAK (Doçentlik sınavı), Doçentlik Sözlü Sınavı, İstanbul Ticaret Üniversitesi, 10.04.2015
ÜAK (Doçentlik sınavı), Doçentlik Sözlü Sınavı, İstanbul Ticaret Üniversitesi, 10.04.2015
Üniversite (Doktora Tez Savunması), A parallel mnolithic approach for the numerical simulation of fluid-structure interaction problems başlıklı tez savunması, İstanbul Teknik Üniversitesi, 23.12.2015
Üniversite (Doktora Tez Savunması), Mehmet Hakan Demir in doktora tez savunması, Yıldız Teknik Üniversitesi, 29.04.2016
ÜAK (Doçentlik sınavı), Eser inceleme, İstanbul Ticaret Üniversietesi, 27.06.2016
ÜAK (Doçentlik sınavı), eser inceleme, İstanbul Ticaret Üniversitesi, 27.06.2016
ÜAK (Doçentlik sınavı), NAZIM KEMAL ÜRE nin doçentlik Eser İncelemesi, İstanbul Ticaret Üniversitesi, 29.01.2020
ÜAK (Doçentlik sınavı), ÖZGE ÖZDEMİR nin doçentlik Eser İncelemesi, İstanbul Ticaret Üniversitesi, 01.05.2020
ÜAK (Doçentlik sınavı), MUSTAFA KAYA nın doçentlik Eser İncelemesi, İstanbul Ticaret Üniversitesi, 05.05.2020